Needle - Sparmax - 0.35 mm - GP35
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for owners of the Sparmax GP35 airbrush who need to maintain or replace their airbrush needle. The key benefit is restoring precision and performance to your airbrush. A potential caveat is that this needle is model-specific, so ensure it matches your GP35. This product is a spare 0.35mm needle designed exclusively for the Sparmax GP35 airbrush, ensuring optimal spray patterns and control.
All features
| Colour | Silver |
|---|---|
| Model Part Number | SPX59521 |
| Brand | Sparmax |
Extended Product Information
FAQs
What is the diameter of this Sparmax needle?
This needle has a diameter of 0.35 mm.
Can I use this needle with other Sparmax airbrush models?
No, this needle is specifically designed for the Sparmax GP35 model and is not compatible with other Sparmax airbrushes.
How often should I replace my airbrush needle?
Needle replacement frequency depends on usage and care. Replace it when you notice a decline in spray quality, bending, or damage.
What happens if my needle is bent?
A bent needle will cause inconsistent spray patterns, splattering, and loss of detail. It should be replaced immediately.
Where is this needle shipped from?
This needle is shipped from France by their Lyon warehouse.
How do I clean the needle?
After cleaning the airbrush with appropriate solutions, gently wipe the needle with a lint-free cloth if it is accessible. Avoid abrasive cleaning methods.
Troubleshooting
Airbrush splattering or uneven spray
Ensure the needle is correctly seated and not bent. Clean the needle tip and air passage thoroughly. Check if the needle is the correct model for your GP35.
Paint not flowing or spraying inconsistently
Verify the needle is fully inserted and properly tightened. Check for blockages in the nozzle or paint channel. Ensure the paint mixture is properly thinned.
Needle won't fit into airbrush
Confirm that you are using the correct 0.35mm needle specifically for the Sparmax GP35. Double-check for any debris in the needle opening or on the needle itself.
Pros and Cons
Pros
- Ensures optimal performance and precision for the Sparmax GP35.
- Direct replacement part, guaranteeing compatibility.
- Helps maintain consistent spray patterns.
- Made with quality materials for durability.
Cons
- Only compatible with the Sparmax GP35 model.
- Requires careful handling due to its delicate nature.
- May need professional cleaning or replacement if damaged.
Setup, Compatibility & Care
Compatibility:
- This needle is specifically designed for the Sparmax GP35 airbrush model only.
- It is not compatible with other Sparmax models or airbrushes from different manufacturers.
Setup (Replacement):
- Disassemble Airbrush: Carefully unscrew the airbrush's rear end and remove the trigger assembly and any associated parts to access the needle.
- Remove Old Needle: Gently unscrew or pull out the old needle from the front of the airbrush.
- Insert New Needle: Align the new 0.35mm needle with the needle chucking mechanism and carefully screw or push it into place, ensuring it is straight.
- Reassemble Airbrush: Carefully reassemble the airbrush in reverse order of disassembly.
- Test: Perform a test spray with water or thinned paint to ensure proper function.
Care:
- Handle the needle with extreme care to avoid bending or damaging the tip.
- After each use, clean the needle by running a cleaning solution through the airbrush and gently wiping the needle with a lint-free cloth if accessible.
- Avoid using abrasive materials for cleaning, as this can damage the needle tip.