Sparmax DH103 Needle - 0.3mm - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for owners and users of the Sparmax DH103 airbrush seeking a replacement needle. The key benefit is restoring optimal performance and projection quality for detailed airbrushing tasks. A minor caveat is that this needle is model-specific, so ensure compatibility before purchasing. The Sparmax DH103 Needle - 0.3mm is a direct replacement part designed to maintain the precision and finish of your airbrush.
All features
| Colour | White |
|---|---|
| Model Part Number | DH103 |
| Brand | Sparmax |
Extended Product Information
FAQs
Is this needle compatible with the Sparmax SP-20X airbrush?
No, this needle is specifically designed for the Sparmax DH103 airbrush model and will not fit other models like the SP-20X.
What is the diameter of this replacement needle?
This replacement needle has a diameter of 0.3 mm.
How often should I replace the airbrush needle?
The frequency of needle replacement depends on usage and care. Replace the needle if it becomes bent, corroded, or if you notice a consistent decline in spray quality despite thorough cleaning.
Can I use this needle for very fine detail work?
Yes, the 0.3 mm diameter is well-suited for fine detail work, precise lines, and controlled shading.
Where is this product shipped from?
This product is shipped from France.
Does this needle come with a nozzle?
No, this product is the replacement needle only and does not include the nozzle.
Troubleshooting
Airbrush is sputtering or spraying unevenly.
Ensure the needle is correctly seated and the chuck nut is tightened appropriately. Check for paint clogs around the needle tip and nozzle, and clean thoroughly.
Needle appears bent or damaged.
Carefully remove the needle and inspect it. If bent, it will need to be replaced with a new 0.3mm needle for the DH103 model to restore proper spray pattern.
Difficulty inserting the needle.
Verify that you are using the correct DH103 model needle and that it is aligned properly with the airbrush body and nozzle. Do not force the needle; ensure it slides in smoothly.
Pros and Cons
Pros
- Ensures optimal performance for the specific DH103 model.
- Facilitates fine detail work with its 0.3mm precision.
- Direct replacement for easy installation.
- Helps maintain consistent spray quality.
Cons
- Only compatible with the Sparmax DH103 airbrush.
- Sold individually, requiring repurchase if multiple spares are desired.
- May require careful handling during installation to avoid bending.
Setup, Compatibility & Care
Setup: To install the Sparmax DH103 Needle, first ensure your airbrush is disconnected from the air source and paint supply. Unscrew the rear needle chuck nut and gently pull out the old needle. Carefully insert the new 0.3mm needle into the airbrush body, ensuring it slides smoothly into the nozzle. Re-secure the needle chuck nut, tightening it enough to hold the needle firmly but not excessively. Test spray with water to check for proper function.
Compatibility: This needle is specifically designed for the Sparmax DH103 airbrush model. It is not compatible with other Sparmax models or airbrushes from different manufacturers.
Care: After each use, it is crucial to clean the needle thoroughly to prevent paint buildup. After disassembling the airbrush as per the main airbrush manual, use a pipe cleaner or a soft cloth dampened with appropriate airbrush cleaner to gently wipe the needle. Avoid using abrasive materials that could scratch or damage the needle tip. Store the airbrush with the needle properly installed or in a safe place to prevent bending.