Foresta Wood Effect Cladding Two-Part Edge Trim - 3mtr - African Paduak

Name: Foresta Wood Effect Cladding Two-Part Edge Trim - 3mtr - African Paduak
Brand: Durasid
SKU: i2zrqh4yth
Availability: InStock

This Trim is used to finish the end of a cladding run. The back part of the trim is fixed to the b...

Best current price£37.52from Professional Building Supplies

Best offers

Shopping.co.uk recommended and popular offers

Lowest price

Professional Building Supplies£37.52Visit shop

Storm Standard Composite Panel Cladding - 174Mm X 3.6Mtr Charcoal

Visit shop

All Offers

20 offers from £37.52 - £53.34

View price history by clicking the chart icon.

Professional Building SuppliesStorm Standard Composite Panel Cladding - 174Mm X 3.6Mtr Charcoal

Free delivery in 1–3 days

£37.52

Visit shop

PVC Cladding UKStorm Golden Standard Composite Panel Cladding - 174Mm X 3.6Mtr Teak

Free delivery in 1–3 days

£37.52

Visit shop

Product Information

Full details

The Durasid Foresta Two-Part Edge Trim in African Paduak is designed for professional installers and DIY homeowners looking to achieve a seamless, high-quality finish on the ends of cladding runs. This system provides a clean, professional aesthetic while securely holding your cladding boards in place; however, it requires precise initial batten measurement to ensure the two-part assembly clips together correctly.

All features

Model Part Number	PSLTE-AP
Brand	Durasid

Extended Product Information

FAQs

Can I use this trim on internal corners?

This specific item is an edge trim for finishing cladding ends; please refer to the dedicated two-part corner profiles for internal/external corner applications.

Does this trim require special tools?

Standard woodworking tools such as a saw for cutting to length and a drill/screwdriver for fixing the back plate are sufficient.

What is the length of each strip?

Each trim piece is 3 meters in length.

Is the finish UV resistant?

Yes, Durasid Foresta trims are designed for outdoor use and feature high UV stability to prevent fading.

Can the trim be painted?

It is not recommended to paint the trim, as it comes finished with a specific wood-effect veneer that is designed to be maintenance-free.

Troubleshooting

Front trim cover does not clip on fully

Check that the cladding board is not pushed too far into the channel, which may be obstructing the clipping mechanism.

Trim feels loose

Ensure the back section is screwed flush against a solid batten; check for any debris inside the clip housing.

Trim is difficult to snap into place

Apply even pressure along the length of the trim; do not force one side as it may cause the plastic to warp.

Pros and Cons

Pros

Clean finish with no visible fixings
Easy to install in two distinct stages
Provides a robust protective seal for board edges
Matches perfectly with Foresta wood effect aesthetics

Cons

Requires accurate initial alignment of the backing plate
Cannot be easily removed once fully clipped
Must be used with compatible Durasid Foresta boards

Setup, Compatibility & Care

Setup:

Ensure your timber or composite battens are level and securely fixed to the wall.
Position and screw the back section of the two-part trim directly into the edge batten.
Install your cladding board so the end rests within the housing of the back trim piece.
Align the front trim cover and apply firm pressure until it clips securely onto the back component.

Compatibility:

This trim is specifically designed for the Durasid Foresta Wood Effect Cladding range. Using it with other brands may result in loose fits or mismatched color aesthetics.

Care:

Clean periodically with warm soapy water and a soft cloth to remove dust or organic growth. Avoid using abrasive pads or harsh chemicals that could damage the wood-effect surface texture.