Cuprinol Anti-Slip Decking Stain - Silver Birch - 5L

Drying times can vary depending on weather conditions. Allow at least 24 hours between coats.

Two coats are usually recommended for optimal protection and colour.

No, the wood must be completely dry before applying the stain.

Clean with a mild detergent and water. Avoid using abrasive cleaners or pressure washers.

Coverage depends on the porosity of the wood. Refer to the product label for specific coverage details.

It is suitable for most wooden decking types. Always test on a small area first.

While it offers some UV protection, consider using a UV protectant for enhanced protection.

Ensure the surface is clean, dry, and properly prepared. Sand the deck if necessary to improve adhesion.

Stir the stain thoroughly before and during application. Apply an even coat to the surface. Apply multiple coats.

Ensure the product is applied correctly, following the manufacturer's instructions. Allow sufficient drying time. Consider applying a second coat.