Bond It High Strength Brick Acid Cleaner - 5 Litres
A powerful acid-based cleaner formulated to effectively remove unsightly stains and residues commo...A powerful acid-based cleaner formulated to effectively remove unsightly stains and residues commonly encountered in building and construction. It is designed to tackle cement and mortar splashes, light oil stains, and grease from various surfaces including brickwork, paving, tiles, earthenware, and concrete. This cleaner is generally safe for most common building materials, excluding limestone and marble. It can also be used, when diluted, to remove efflorescence (salt deposits). For application, it is crucial to wear protective gear such as gloves, overalls, boots, and goggles. Metal surfaces and paintwork should be protected with polythene sheeting and tape before application. Begin by removing loose debris with a stiff brush. For brickwork, saturate the area with water before cleaning to prevent mortar damage. It is recommended to test the cleaner on an inconspicuous area first, using a dilution of 4 parts water to 1 part cleaner. For general use, dilute the cleaner with water at a ratio of 2 to 4 parts water to 1 part cleaner. Apply with a brush, allow it to work for 10-15 minutes, keeping the area moist and scrubbing occasionally. Rinse thoroughly with ample water. Never add water to the neat cleaner; always add the cleaner to the water. If stains persist, repeat the process or use the cleaner undiluted after a patch test. For efflorescence, use a dilution of 8 parts water to 1 part cleaner. Always use a plastic container for diluting.
This guide is for construction professionals and DIY enthusiasts needing to remove tough stains from brickwork, paving, and concrete using Bond It High Strength Brick Acid Cleaner. The key benefit is effective removal of cement, mortar, and other residues. A key caveat is that it is not suitable for limestone or marble surfaces. This guide provides comprehensive instructions for safe and effective use, ensuring you can restore surfaces to their original condition.
All features
Brand
Bond it
Extended Product Information
FAQs
What safety gear do I need?
You need gloves, overalls, boots, and goggles to protect yourself from the cleaner.
Can I use this on my marble countertops?
No, this cleaner is not suitable for use on limestone or marble surfaces.
How do I dilute the cleaner?
Always add the cleaner to the water. For general use, dilute at a ratio of 2 to 4 parts water to 1 part cleaner. For efflorescence, use a dilution of 8 parts water to 1 part cleaner.
How long should I leave the cleaner on the surface?
Allow the cleaner to work for 10-15 minutes, keeping the area moist and scrubbing occasionally.
What should I do if the stains are still there after cleaning?
Repeat the process or use the cleaner undiluted after testing on a small, hidden area.
Can I use a metal container to dilute the cleaner?
No, always use a plastic container to dilute the cleaner.
How do I prepare the surface before cleaning?
Remove loose debris with a stiff brush and protect any surrounding surfaces, especially metal and paintwork.
Troubleshooting
Stains persist after cleaning.
Repeat the cleaning process or use the cleaner undiluted after a patch test.
Cleaner not working effectively.
Ensure the correct dilution ratio is used. Allow the cleaner to work for the recommended time, and scrub occasionally.
Surface damage occurs.
Immediately rinse the area with plenty of water. Check that the cleaner is compatible with the surface. Consider using a less concentrated dilution.
Efflorescence returns after cleaning.
Use a dilution of 8 parts water to 1 part cleaner. Ensure the area is well-ventilated during and after the cleaning process.
Inconsistent results across the surface.
Ensure even application of the cleaner and consistent scrubbing. Rinse the entire area thoroughly.
Pros and Cons
Pros
Highly effective at removing stubborn stains and residues.
Versatile for use on a variety of surfaces commonly found in construction.
Provides clear instructions for dilution, ensuring proper usage.
Helps restore surfaces to their original appearance.
Can be used to address efflorescence issues.
Easy to apply with readily available tools.
Cons
Not suitable for use on limestone and marble.
Requires the use of protective gear, including gloves and goggles.
Can be corrosive if not handled properly.
May require multiple applications for heavily stained areas.
Requires thorough rinsing with water after application.
Needs careful surface preparation, such as protecting metal surfaces.
Setup, Compatibility & Care
Setup
Preparation: Before use, gather necessary safety equipment: gloves, overalls, boots, and goggles.
Surface Preparation: Remove loose debris with a stiff brush. Protect surrounding areas.
Dilution: Always dilute the cleaner in a plastic container, adding the cleaner to water.
Compatibility
Suitable for: Brickwork, paving, tiles, earthenware, and concrete.
Not Suitable for: Limestone and marble.
Test: Always test on an inconspicuous area first, using a 4:1 water to cleaner dilution.
Care
Safety: Always wear appropriate protective gear.
Dilution Ratios: Use the correct dilution ratio for the application. For general use, use a 2:1 to 4:1 water to cleaner ratio. For efflorescence, use an 8:1 water to cleaner ratio.
Application: Apply with a brush and allow the cleaner to work for 10-15 minutes, keeping the area moist.
Rinsing: Rinse thoroughly with ample water after use.
Storage: Store in a cool, dry place, and keep out of reach of children and pets. Do not allow the product to freeze.
OnBuy.com£11.66Visit shop 
eBay£12.79Visit shop 
B&Q£13.98Visit shop 
