Bond It Flexible Admixture - White 5 Litre

The recommended dosage is up to 5 litres per 20kg bag of adhesive or grout. Always refer to the product label or technical data sheet for specific instructions.

It is designed for use with cement-based adhesives and grouts. Always check compatibility with the specific product you are using.

Using too much admixture can affect the setting time of the adhesive or grout, potentially slowing it down. Follow the manufacturer's recommendations.

Yes, refer to the product packaging for the specific expiry date. Store in a cool, dry place to maintain its effectiveness.

Yes, it can be used for outdoor applications, provided that the adhesive or grout being used is also suitable for outdoor conditions.

Yes, provided that the existing tiles are properly prepared (cleaned and roughened if necessary) to ensure good adhesion.

Clean up spills immediately with water while the product is still wet. Once dried, it may be more difficult to remove.

Reduce the amount of admixture used or consult the adhesive manufacturer's instructions to ensure compatibility and ideal mix ratio.

Ensure the surface is properly prepared, and that the adhesive mix has been applied correctly. Check that the correct amount of admixture has been used.

Check that the grout was mixed with the correct amount of admixture and that the substrate is stable. Ensure that the grout lines were not too thick, as this can also cause cracking.