Setup, Compatibility & Care
Proper preparation is essential for a lasting finish. Start by ensuring the surface is entirely dry, clean, and free of oil, grease, or rust. Use a wire brush or abrasive paper to prep existing painted surfaces, and always degrease with white spirit before painting. If you are working with bare aluminium or galvanised steel, you must use a suitable metal primer (such as Hammerite Special Metals Primer) to ensure proper adhesion. For bare or rusty steel, a product like Hammerite No. 1 Rustbeater is recommended as a base. After application, use white spirit or a dedicated brush cleaner to remove excess paint from your tools immediately, as the solvent-based nature of this paint makes it difficult to remove once fully cured.