Frenchic Trim Paint - White

No, Frenchic Trim Paint is self-priming. This means you can apply it directly to most prepared surfaces without needing a separate primer coat.

No, this paint is also self-sealing. The finish is designed to be durable and robust on its own, so no topcoat is required.

A 500ml tin covers approximately 7m² with a single coat. For a more durable finish with two coats, expect coverage of about 3.5m².

No, this paint is specifically formulated for interior use only and is not suitable for exterior applications.

Use a good quality synthetic brush for cutting in edges and details, and a short-nap roller for larger flat areas. Apply in thin, even coats for best results.

Yes, the paint is EN71-3 certified, making it safe for use on children's toys and furniture. It is also water-based with low VOCs and low odour.

The paint is touch dry within 30-60 minutes. However, recoating is recommended after 2-4 hours, and the paint will take up to 2 weeks to fully cure and reach maximum hardness.

Yes, you can paint over existing gloss paint. However, for optimal adhesion, it is recommended to lightly sand the surface first and then clean away any dust before applying the Frenchic Trim Paint.

Ensure the paint is stirred thoroughly before and during use. Apply thin, even coats using a good quality brush or roller. Allow adequate drying time between coats.

Check that the surface was properly cleaned and degreased. For very slick surfaces like some laminates or previously highly glossed paint, a light sanding may be necessary to provide grip.

This paint has a specific soft-satin sheen. Ensure you have the correct product and manage expectations regarding the finish. Two coats generally ensure a more consistent sheen.

Ensure two full coats have been applied and allowed to cure properly (this can take up to 2 weeks for maximum hardness). Avoid heavy abrasion or cleaning attempts during the initial curing period.