Frenchic Trim Paint - Iceman - Blue

Cool, calm and collected, with a little smokiness in its base, this is a fab, greyish pale blue. S...

Best current price£16.50from Frenchic Paint

One Offer

1 offer from £16.50

View price history by clicking the chart icon.

Frenchic PaintFrenchic Paint Iceman Trim Paint 500Ml & Water Based
£6.95 delivery
£16.50
Visit shop

Product Information

Full details

Frenchic Trim Paint in Iceman is designed for DIY enthusiasts and homeowners looking for a durable, easy-to-use paint for interior woodwork and furniture. Its key benefit is the all-in-one formulation, eliminating the need for separate primers and topcoats, saving time and effort. However, users should be aware that it provides a soft-satin sheen, which may not be suitable for projects requiring a high-gloss finish.

All features

ColourBlue
Model Part Number39983681339479
BrandFrenchic

Extended Product Information

FAQs

Do I really need a primer and topcoat?

No, Frenchic Trim Paint is formulated to be self-priming and self-sealing, meaning you can apply it directly to most prepared surfaces without a separate primer or topcoat for a durable finish.

How much area does 500ml of paint cover?

A 500ml tin will cover approximately 7m² (75 sq ft) with a single coat. For a more durable finish, two coats are recommended, meaning you can expect to cover about 3.5m² (37.5 sq ft) with two coats.

Can I use this paint on radiators?

Yes, this paint is suitable for use on powder-coated radiators. Ensure the radiator is clean and dry before application.

Is this paint suitable for kitchen cabinets?

Yes, it is suitable for various furniture, including kitchen cupboards, wood, and laminate surfaces. The robust, scuff-resistant finish is ideal for frequently used items.

What is the finish like?

The paint provides a soft-satin sheen, offering a subtle elegance rather than a high-gloss look.

How should I clean my painted surfaces?

Once fully cured, surfaces painted with Frenchic Trim Paint can be wiped clean with a slightly damp cloth. Avoid abrasive cleaners.

Is this paint safe for children's furniture?

Yes, the paint is EN71-3 certified, making it safe for use on children's toys and furniture.

Troubleshooting

Paint not adhering well

Ensure the surface was properly cleaned and degreased before application. Lightly sand any glossy surfaces. Ensure previous coatings are sound.

Streaky or uneven finish

Apply paint in thinner, more even coats. Avoid overworking the paint. Ensure you are using a good quality brush or roller suitable for water-based paints.

Drying time is excessive

Ensure application is within recommended temperature and humidity ranges. Avoid applying too thickly. Drafts can sometimes speed up surface drying but hinder full cure.

Paint chipping or peeling

This may indicate inadequate surface preparation or insufficient coats. Ensure surfaces were clean and properly adhered to. Apply a second coat if only one was used.

Pros and Cons

Pros

  • All-in-one primer and topcoat saves time and money.
  • Durable and scuff-resistant finish for high-traffic areas.
  • Low VOC and low odour for a more pleasant painting experience.
  • Safe for children's toys due to EN71-3 certification.
  • Excellent adhesion to a wide variety of surfaces.

Cons

  • Soft-satin sheen may not be suitable for those preferring high gloss.
  • Requires two coats for optimal durability, increasing application time.
  • Coverage estimates are approximate and can vary based on surface porosity and application method.

Setup, Compatibility & Care Instructions

Preparation: Ensure surfaces are clean, dry, and free from grease or contaminants. Lightly sand glossy or slick surfaces if necessary to improve adhesion, then wipe clean. No primer is required.

Application: Stir the paint thoroughly before use. Apply with a brush or roller in thin, even coats. For best results and maximum durability, two coats are recommended. Allow adequate drying time between coats.

Compatibility: Suitable for interior wood (new or previously painted), laminate, metal, powder-coated radiators, and previously painted or primed surfaces. Not recommended for exterior use or floors.

Care: Clean up brushes, rollers, and spills immediately with water. Once fully cured, the finish is durable and can be wiped clean with a slightly damp cloth. Avoid abrasive cleaners or scouring pads, as these can damage the finish.

Similar items

Price History

DatePrice
Visit shop