Best current price£5.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£5.95Visit shop B&Q - Estate Picture Gallery Red Chalky Wall & Ceiling Emulsion Paint100Ml Tester Pot
Visit shop
Amazon£36.50Visit shop F&B Modern Eggshell-Picture Gallery Red-750 L
Visit shop
Homebase£113.00Visit shop Farrow & Ball Dead Flat Brinjal Matt Paint 5L
Visit shop27 offers from £5.95 - £121.00
View price history by clicking the chart icon.
The Farrow & Ball Dead Flat Paint in Picture Gallery Red (No. 42) is designed for homeowners seeking a rich, warm, and timeless red for interior walls and woodwork, including high-traffic areas like hallways and living rooms. Its key benefit is a beautiful, exceptionally matte finish that offers surprising durability and scuff resistance. A potential consideration is that alkyd-based paints may require specific preparation and cleaning methods.
| Colour | Red |
|---|---|
| Model Part Number | No. 42 |
| Brand | Farrow & Ball |
It is suitable for interior walls, ceilings, woodwork, and metal surfaces.
Yes, it is scuff-resistant and can be cleaned with a damp cloth and mild soap.
Two coats are generally recommended for the best colour depth and finish.
The dead flat finish is very low sheen and absorbs light, which can help to mask minor imperfections better than glossier finishes.
It typically dries to the touch in 2-4 hours and can be recoated after 4-6 hours, depending on conditions.
While durable, it is best suited for high-traffic living areas and hallways. For very high-moisture areas like bathrooms and kitchens, consider Farrow & Ball's Modern Emulsion or Estate Eggshell finishes which offer greater washability and durability in those specific environments.
Ensure the surface was properly prepared, clean, and dry. Use the recommended primer for the surface type.
Stir the paint thoroughly. Apply in thin, even coats, maintaining a wet edge. Avoid over-brushing. Ensure consistent temperature and humidity during application.
Allow the paint to dry completely for at least 24 hours before assessing the final colour. The appearance of dead flat finishes can change slightly with light.
Use a soft, damp cloth with a mild, non-abrasive soap. Wipe gently and rinse with a clean damp cloth. Avoid harsh scrubbing.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. For previously painted surfaces, lightly sand and clean. For new or bare surfaces, use the appropriate Farrow & Ball primer. For optimal results on woodwork, particularly if painting a dark colour over a lighter one, use a suitable primer.
Application: Stir the paint thoroughly before and during use. Apply liberally with a good quality brush or roller. Two coats are usually recommended for best results. Dead Flat can be thinned slightly with a suitable solvent if necessary, following manufacturer guidelines.
Compatibility: Suitable for interior walls, ceilings, woodwork, and metal. Always test on an inconspicuous area if unsure.
Care: To clean, use a soft cloth dampened with water and mild soap if necessary. Avoid abrasive cleaners or excessive rubbing, which could affect the delicate finish.
