Best current price£34.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£34.00Visit shop B&Q - All White No.2005 Dead-Flat Matt Multi-Surface Emulsion Paint750Ml
Visit shopB&Q£34.00Visit shop B&Q - School House White No.291 Dead-Flat Matt Multi-Surface Emulsion Paint750Ml
Visit shop
Amazon£36.17Visit shop White Farrow & Ball New Dead Flat 2001 Strong 750Ml
Visit shop42 offers from £34.00 - £79.00
View price history by clicking the chart icon.
This guide is for homeowners and designers seeking a pure, versatile white paint. The key benefit of Farrow & Ball All White is its unique, pigment-free formulation that creates a soft, sympathetic white without cold undertones. A potential caveat is that Casein Distemper requires specific preparation and application techniques for optimal results.
| Colour | White |
|---|---|
| Brand | Farrow & Ball |
Casein Distemper is a traditional water-based paint finish known for its chalky, matte appearance. It uses casein, a milk protein, as a binder, offering a breathable and soft finish.
All White is suitable for most interior rooms. However, due to its delicate matte finish, it's best suited for lower-traffic areas or areas where a soft, sophisticated look is desired. For very high-moisture or high-traffic areas, consider Farrow & Ball's Modern Emulsion or Estate Eggshell finishes.
Clean gently with a soft, slightly damp cloth. Avoid harsh scrubbing or abrasive cleaners, which can damage the chalky finish.
Yes, you can paint over Casein Distemper with other Farrow & Ball finishes, but ensure the surface is properly prepared (clean, dry, and lightly abraded) and use the appropriate primer for the new finish.
Unlike brilliant whites that can have cold blue undertones, Farrow & Ball All White contains no other pigment but white, creating a soft, sympathetic, and pure white that appears natural in various light conditions.
A 5-litre tin of Farrow & Ball paint typically covers approximately 60-70 square metres with one coat. Coverage can vary depending on the surface porosity and application method.
Farrow & Ball paints are known for their low VOC content and minimal odour compared to many other paint brands. However, slight odours are possible during application and drying.
Ensure the paint is thoroughly stirred before and during application. Apply in consistent strokes, avoiding over-brushing. Make sure the surface is properly prepared and primed.
The surface may not have been properly prepared. Ensure it is clean, dry, and free from dust, grease, or contaminants. If painting over a glossy surface, it may need further abrasion or a specific primer.
Paint colours can appear different in varying light conditions. Ensure you are viewing the paint in natural daylight. Check that the correct primer was used, as primer colour can affect the topcoat's final appearance.
This is characteristic of a distemper finish. Avoid excessive rubbing. For cleaning, use a very soft, slightly damp cloth only.
Preparation: Casein Distemper requires surfaces to be clean, dry, and sound. For best adhesion, prime bare plaster with one coat of Farrow & Ball Wall & Ceiling Primer & Undercoat, diluted slightly with water. Previously painted surfaces should be thoroughly cleaned and lightly abraded. Ensure all surfaces are free from dust, grease, and flaking paint.
Application: Stir the paint thoroughly before and during use. Apply with a soft brush or roller in a consistent pattern. Distemper is typically applied in two coats, allowing adequate drying time between each. For the best finish, avoid over-brushing.
Compatibility: This Casein Distemper is designed for interior use on walls and ceilings. It is not recommended for high-moisture areas like bathrooms or kitchens unless properly ventilated and sealed, or for woodwork and metal. It is designed to be used with Farrow & Ball primers and undercoats for optimal performance. Do not mix with other types of paint.
Care: To clean surfaces painted with Casein Distemper, use a soft, damp cloth or sponge. Avoid abrasive cleaners or excessive scrubbing, as this can damage the delicate matte finish. For stubborn marks, a very mild soap solution can be used sparingly, followed by a clean damp cloth.
