Lenco Turntable - Walnut - Bluetooth

Turn on your Bluetooth speaker and ensure it's in pairing mode. Turn on the turntable and select Bluetooth as the output. The turntable should automatically connect to the speaker.

You can connect to powered speakers via RCA cables or use a Bluetooth-enabled speaker.

Connect the turntable to your computer via USB. Use audio recording software (e.g., Audacity) to record and save the audio from your records.

The stylus typically lasts for about 500-1000 hours of play. Check the stylus regularly for wear and tear, and replace it when the sound quality diminishes.

Yes, there is a rotary volume control on the turntable to adjust the output volume.

Yes, the turntable has an auto-stop function that stops the record when it reaches the end.

The warranty period for the Lenco LBT-188 is typically two years.

Check the power adapter connection and ensure it is securely plugged into both the turntable and the wall outlet. Try a different outlet.

Verify that the RCA cables are correctly connected to the amplifier or speakers. Make sure the amplifier/speakers are turned on and the correct input is selected.

Make sure Bluetooth is enabled on your speaker and that it is discoverable. Restart both the turntable and the speaker if necessary. Check for interference from other devices.

Ensure the stylus is clean and not damaged. Check the tracking force and adjust if necessary, according to the turntable's manual. Make sure the record is clean and free of dust.

Ensure the USB cable is properly connected to both the turntable and your computer. Check your computer's audio input settings to confirm it is recognizing the turntable.