Audio Technica AT-LP60XUSB - Grey

Connect the turntable to your computer using the included USB cable. Then, install and open the Audacity software (or your preferred recording software) and select the turntable as your audio input device.

Yes, you can connect it to any speakers that have RCA inputs or a 3.5mm input (using the included adapter).

Connect the turntable to your computer via USB. Use the free Audacity software (or another audio recording program) to record the audio from your records and save it as a digital file (e.g., MP3, WAV).

The turntable uses an integral Dual Magnet phono cartridge with a replaceable diamond stylus.

Yes, if your receiver or amplifier doesn't have a phono input, make sure the switch on the back of the turntable is set to 'Line'. If your receiver does have a phono input, set the switch to 'Phono'.

The Audio-Technica AT-LP60XUSB comes with a one-year warranty.

Use a soft brush (included or specifically designed for stylus cleaning) and gently brush from back to front along the stylus. Avoid brushing from side to side.

Yes, you can replace the stylus yourself. Replacement styluses are available for purchase.

Check the power connection and ensure the AC adapter is securely plugged in. Verify the power outlet is working.

Ensure the turntable is properly connected to your amplifier or powered speakers. Check the connections and volume levels. If using the USB output, ensure your computer recognizes the device.

Clean the stylus with a soft brush. Check the stylus for damage and consider replacing it if needed.

Make sure the speed selector is set correctly for the record you are playing (33-1/3 or 45 RPM).