Armstead Trade Vinyl Matt 10L - White

It is suitable for interior walls and ceilings.

Typically, 1-2 coats are sufficient for good coverage. On highly porous surfaces, two coats are recommended.

Allow 2-4 hours between coats, depending on the temperature and humidity.

Coverage is up to 14m²/L on smooth surfaces.

Clean tools with water immediately after use.

Yes, it is suitable for these locations, though consider that it is a matt finish, so it may not be as wipeable as other finishes. Make sure the room has adequate ventilation.

No, it is not designed for exterior applications.

Ensure the surface is properly prepared and primed. Apply a second coat, allowing for the recommended drying time between coats.

Make sure the surface is not too porous. Apply a sealing coat of thinned paint. Apply a second coat after the first has dried.

Check the temperature and humidity. Ensure adequate ventilation. Allow for the recommended drying time, which is dependent on temperature and humidity.