Classic C-Shaped Polystyrene Internal & External Coving Corner - White

Use an adhesive specifically designed for polystyrene or expanded polystyrene (EPS).

While the product can be used in bathrooms, ensure the area is well-ventilated and consider using a moisture-resistant paint.

Use a mitre box and fine-tooth saw to achieve precise cuts. Measure twice and cut once!

Use an acrylic or water-based paint designed for polystyrene. Avoid solvent-based paints.

Wipe with a soft, damp cloth. Avoid abrasive cleaners.

These coving corners are designed for straight walls and corners. For curved walls, you may need a flexible coving solution.

Use a flexible caulk that is paintable. Apply a smooth bead and wipe away any excess.

You will need one internal and one external corner for each corner of your room. Plan accordingly to avoid running out of stock.

Ensure you are using the correct adhesive for polystyrene and that the surfaces are clean and dry. Consider using additional support, such as masking tape, while the adhesive sets.

Use caulk to fill in any gaps. Smooth the caulk with a wet finger or tool to create a seamless finish. Allow the caulk to dry completely before painting.

Ensure the coving is primed before painting. Use a paint designed for polystyrene and follow the manufacturer's instructions. Lightly sand the surface if necessary to improve adhesion.