Colours Nayak Traditional Fluted Profile Polystyrene Coving - White

You will need a saw (fine-toothed), mitre box, coving adhesive, filler, sandpaper, a damp cloth, measuring tape, pencil, and potentially a level.

Yes, the coving is paintable. Prime it first, then apply your desired colour using standard interior paint.

Use an adhesive specifically designed for polystyrene coving. Follow the manufacturer's instructions for the best results.

Use a fine-toothed saw and a mitre box for accurate cuts. Measure carefully and make sure you're cutting at the correct angles for corners.

Clean the coving with a damp cloth. Avoid using abrasive cleaners or solvents.

While suitable for most rooms, be cautious in bathrooms due to potential humidity. Ensure proper ventilation and consider a moisture-resistant paint.

Yes, the coving is designed for DIY installation. However, ensure you have the necessary tools and follow the instructions carefully for the best results.

Ensure surfaces are clean and dry. Use an appropriate adhesive for polystyrene and follow the manufacturer's instructions. Use masking tape to hold the coving in place while the adhesive dries.

Use filler to fill the gaps and sand smooth once dry. Ensure accurate measurements and cuts.

Carefully handle and cut the coving. If damaged, repair with filler and repaint.