Coo-Var All Metal Primer - Grey 500ml

This primer is suitable for use on iron, steel, aluminium, brass, copper, and galvanised surfaces.

Yes, Coo-Var All Metal Primer is a water-thinnable acrylic primer.

Clean the surface to remove dirt, grease, and rust. Sand the surface lightly for better adhesion.

Typically, one coat is sufficient. However, for heavily rusted surfaces, a second coat may be necessary.

Refer to the product label for the recommended drying time before applying your topcoat. This usually varies from 4 to 24 hours, depending on conditions.

Clean up spills and tools immediately with water.

Yes, it is suitable for exterior use but consider using a suitable topcoat for added protection against the elements.

The primer is available in Grey and Red.

Ensure the surface is properly prepared (clean, dry, and free of rust). Lightly sand the surface to improve adhesion. Apply an even coat and avoid applying too much primer at once.

Ensure all rust is removed before priming. Apply a second coat of primer if necessary. If the rust is severe, consider using a rust converter before priming.

Ensure proper ventilation during drying. Check the temperature and humidity levels; high humidity and low temperatures can slow drying times. Apply a thinner coat of primer.