Wavin OsmaSoil Soil S/S bend 87.5° 110mm - Black

It is used in PVC-U soil systems for the safe and efficient removal of sanitary waste, allowing for an 87.5-degree change in pipe direction.

It features a push-fit ring-seal socket with captive seal technology and a plain end for further connection.

While durable, the OsmaSoil system is primarily designed for above-ground soil and waste applications. Consult Wavin for specific underground drainage recommendations.

The 110mm diameter is standard, but for guaranteed performance and leak-free joints, it is recommended to use it with other Wavin OsmaSoil components.

It signifies that the product has been independently tested and certified by the British Standards Institution (BSI) to meet the requirements of the relevant European standard for soil and drainpipe systems.

Ensure the pipe is pushed fully into the socket until it stops. The captive seal technology is designed to automatically create a watertight and airtight seal.

The Wavin OsmaSoil system is available in a variety of colors, including black for this specific bend.

Ensure the pipe is fully inserted into the socket for push-fit joints. For solvent weld joints, ensure surfaces were properly prepared and sufficient solvent cement was used. Re-make the joint if necessary, ensuring correct procedure.

Check for obstructions inside the socket or on the pipe end. Ensure the pipe end is lightly chamfered. Use a silicone-based lubricant if necessary, but avoid petroleum-based lubricants.

Inspect the seal carefully. If damaged, the fitting may need to be replaced to ensure a watertight seal.