Wavin OsmaSoil 32mm Solvent Weld Socket Boss Adaptor - 2S298B

This adaptor is used to create a solvent weld joint, connecting a 32mm Osma welded waste pipe to an OsmaSoil boss socket.

The adaptor is manufactured from PVC-U (Unplasticized Polyvinyl Chloride).

It means the seals within the fitting are designed to remain securely in place during installation, ensuring a highly reliable and leak-free connection.

No, this adaptor is specifically designed for waste pipe applications within the OsmaSoil range and is not suitable for potable water.

Yes, solvent cement is required for the installation and is typically sold separately. Always use a cement suitable for PVC-U.

The keyway is a design feature that helps ensure the correct fall or slope is achieved when installing the waste pipe, which is crucial for proper drainage.

While the product is designed for ease of use, proper installation requires understanding solvent welding techniques. It is generally used by plumbing professionals.

Ensure surfaces were clean and dry before applying solvent cement. Verify that sufficient solvent cement was used and the joint was held correctly during the setting period. Check for any cracks or damage to the fitting or pipe.

Check for any debris or obstruction inside the socket or on the pipe end. Ensure you are using the correct size pipe (32mm) and fitting.

Utilize the unique keyway feature of the adaptor to guide the pipe to the correct angle. Ensure the support system for the pipework is adequate to maintain the desired slope.