Everbuild Forever Clear Sealant - White

The sealant becomes tack-free in approximately 20-30 minutes and fully cures within 24 hours, depending on bead size, temperature, and humidity.

No, Everbuild Forever Sealant is silicone-based and cannot be painted over once cured. You would need to remove it and use a paintable sealant if painting is required.

The product is formulated with Mould Shield technology, which is guaranteed to prevent black mould growth for 10 years under normal use conditions.

Yes, it is weatherproof and suitable for both indoor and outdoor applications, including around window and door frames.

Yes, it is generally suitable for UPVC window frames, providing a durable and waterproof seal. Ensure the surface is clean and dry before application.

Old silicone sealant can be carefully cut away with a sharp knife or scraper. For stubborn residue, a silicone sealant remover may be used, followed by cleaning the surface.

This specific product is in white. Other colours like Grey and Ivory are available under the Everbuild Forever Sealant range.

Ensure the surface is thoroughly clean, dry, and free from dust, grease, or old sealant residue. The surface may not be compatible; test in a small area first.

Practice applying a consistent pressure on the sealant gun. Ensure the nozzle is cut correctly for the desired bead size. Smooth the bead immediately after application with a wet tool.

Ensure adequate ventilation. Curing may take longer in cold or humid conditions. Check the expiry date of the sealant tube.

While guaranteed for 10 years, severe, persistent, or extreme contamination might challenge any sealant. Ensure the initial application was thorough and the surrounding area is kept reasonably clean.