EcoFlow RIVER 3 Portable Power Station - Black

The EcoFlow RIVER 3 can power devices with a continuous draw of up to 300W (or 600W with X-Boost activated). This typically includes smartphones, laptops, drones, cameras, small fans, LED lights, portable projectors, and other light to medium-wattage electronics and small appliances.

The EcoFlow RIVER 3 supports incredibly fast charging, allowing it to recharge from 0% to 100% in approximately 1 hour when using the standard AC wall charger.

Yes, with its compact design and IP54 waterproof rating, the RIVER 3 is well-suited for outdoor use. The IP54 rating protects it from dust ingress and water splashes, making it durable for camping, picnics, and other outdoor activities. However, it should not be submerged in water.

The RIVER 3 features an advanced LiFePO4 battery, which boasts a long lifespan of 3000 cycles to 80% capacity. This means it can undergo 3000 full charge and discharge cycles before its total capacity degrades to 80% of its original rating, ensuring years of reliable power.

Yes, the EcoFlow RIVER 3 includes a <20/10 ms UPS function. This feature allows it to provide instant backup power to connected precision devices, like medical equipment or computers, preventing data loss or interruption during a sudden power outage.

The EcoFlow RIVER 3 can charge up to 7 appliances simultaneously, depending on their individual power consumption and the type of ports they require. Always ensure the total wattage of all connected devices does not exceed the power station's output capacity.

No, the EcoFlow RIVER 3 is engineered for whisper-quiet operation. It typically produces less than 30 dB of noise, which is comparable to a quiet whisper, making it ideal for use in noise-sensitive environments.

For optimal battery health during long-term storage, ensure the unit is fully charged at least once every three months. Store it in a cool, dry place, away from direct sunlight and extreme temperatures, ideally maintaining a charge level between 20% and 80%.

Ensure the power button is pressed and held for a few seconds to power on. If not charging, check that the charging cable is securely connected to both the power station and a live power source. Try a different AC outlet or charging method (e.g., car charger, solar panel) to rule out a faulty source. Ensure no physical damage to cables or ports.

First, confirm the RIVER 3 is turned on and has sufficient battery charge. For AC or DC outputs, make sure their respective buttons are activated (usually indicated by an LED). Check that the power requirements of your device do not exceed the RIVER 3's 300W rated output (or 600W with X-Boost). Try connecting a different device to isolate the issue. Inspect cables for damage.

The EcoFlow RIVER 3 is designed for quiet operation (<30 dB). Some fan noise is normal under heavy load or during charging. If the noise is excessive, high-pitched, or accompanied by unusual heat, ensure the unit has adequate ventilation and is not obstructed. Disconnect all devices and allow it to cool down. If the issue persists, contact EcoFlow customer support.