Zinsser Bulls Eye 1-2-3 Plus Primer - White - 1 L

It can be used on wood, drywall, plaster, metal, and previously painted surfaces, both interior and exterior.

Clean the surface to remove dirt, grease, and loose paint. Lightly sand glossy surfaces.

Usually one coat is sufficient, but two coats may be needed for heavily stained areas or porous surfaces.

Yes, it is suitable for both interior and exterior applications.

It is compatible with most latex and oil-based topcoats.

Refer to the product label for the recommended drying time, usually a few hours.

Clean up spills and tools with soap and water while the primer is still wet.

Yes, it is designed to block stains and prevent them from bleeding through your topcoat.

Apply a second coat of primer, especially over the affected areas. Ensure the primer has fully dried before applying a topcoat.

Ensure the surface is properly cleaned and lightly sanded. Allow the primer to dry completely before applying a topcoat.

Ensure adequate ventilation. Check the product label for recommended drying times and temperature guidelines.