Ronseal Garden Paint - Slate

You can use it on wood, terracotta, brick, and stone. For metal surfaces, you will need to apply a suitable metal primer first to ensure proper adhesion and durability.

No, Ronseal Garden Paint is specifically designed for outdoor garden substrates and is not recommended for indoor use.

The paint is formulated to be rainproof within one hour of application, under normal conditions. This means it will resist being washed away by light rain.

A primer is generally not needed for wood, terracotta, brick, or stone. However, it is essential to use a suitable metal primer before applying this paint to any metal surfaces.

Clean brushes, rollers, and other equipment immediately after use with warm, soapy water.

While it waterproofs and resists cracking and peeling, which helps protect surfaces from moisture ingress that can lead to rot, it is not a dedicated wood preserver. For specific rot protection, consider a separate wood preserver underneath.

Yes, you can paint over existing paint, provided the old paint is sound, clean, and not flaking. Sand lightly if the previous surface is glossy to aid adhesion.

Ensure the surface was thoroughly cleaned and dried before application. For metal surfaces, confirm that an appropriate metal primer was used. Rough up smooth surfaces slightly with sandpaper to improve adhesion.

Ensure the paint was stirred very well before and periodically during application. Apply the paint in thin, even coats, and allow adequate drying time between coats. Two coats are recommended for consistent color.

High humidity, low temperatures, or applying paint too thickly can extend drying times. Ensure proper ventilation, favorable weather conditions, and apply thinner coats. Note that 'rainproof in an hour' doesn't mean fully cured.

This often indicates improper surface preparation (e.g., painting over loose or dirty surfaces) or applying coats too thickly. Ensure surfaces are sound and clean, and apply thin, even layers.