Sadolin Wet Wood Decking Stain - 2.5 L - Teak

Yes, a key feature of this stain is that it can be applied to wet or dry wood.

Coverage can vary depending on the wood's condition and the application method. Refer to the product label for specific details.

The stain typically recoats in 4-6 hours.

For the best results, two coats are recommended.

It provides a matt/translucent finish.

It's suitable for most types of exterior wooden decking. Always test on a small, inconspicuous area first.

Regularly clean the decking with a mild detergent and water. Inspect the decking annually for signs of wear and tear, and reapply the stain as needed.

Ensure even application with a brush and avoid applying too much stain in one area. Consider a second coat.

Check the weather conditions. Ensure the temperature is suitable for drying and there is adequate ventilation. Avoid applying too thickly.

Clean the area thoroughly, removing the growth. Ensure proper ventilation and apply a fresh coat of stain to prevent future growth.

Ensure proper surface preparation before applying the stain. Remove any loose or flaking material, sand the surface, and reapply the stain.