Soho Lighting 1 Gang Dimming Toggle Switch - Gold

This switch is specifically designed for dimmable LED lighting. It can control up to 250W of LED load. It is not compatible with incandescent, halogen, or non-dimmable LED bulbs.

Yes, this switch supports multi-point dimming. You can use additional compatible toggle or rocker switches in conjunction with the IDM250 dimmer module. However, only one IDM250 module is required per circuit.

Use a soft, dry cloth to maintain the finish. For any persistent marks, a slightly damp cloth can be used, followed by immediate drying with a soft cloth. Avoid abrasive cleaners.

The dimmer module (Enkin IDM250) comes with a five-year guarantee.

Due to the electrical nature of dimming circuits, professional installation by a qualified electrician is strongly recommended for safety and to ensure compliance with regulations.

The Enkin IDM250 module integrated into this switch can control up to 250W of LED lighting.

No, the soft-start function is designed to gradually bring lights to the set level over 1-2 seconds, which actually prolongs bulb life by reducing wear and tear associated with sudden power surges.

Ensure the load is compatible LED lighting and does not exceed the 250W limit. Verify wiring connections are secure. If the issue persists, the LED bulbs themselves might be incompatible with dimmers.

Check that the circuit breaker is on and that power is reaching the switch. Verify all wiring connections are correct and secure according to the installation diagram. Ensure the load does not exceed 250W.

Confirm that you are using dimmable LED bulbs. Non-dimmable LEDs will not function correctly with a dimmer switch. Check that the IDM250 module is correctly installed and wired.

This could indicate an overload. Ensure the total wattage of the connected LED lights does not exceed 250W. Check for loose connections, which can also cause buzzing. If overheating persists, switch off power and consult a qualified electrician.