Soho Lighting 20A 1 Gang 2 Way Toggle Switch Screwless - Bronze

A 2-way switch means that a single light or group of lights can be controlled from two different locations. For example, one switch at the top of the stairs and another at the bottom to control the same landing light.

This is a standard 20A toggle switch and is not designed as a dimmer. If you require dimming functionality, a separate dimmer switch would be necessary.

The bronze plates are hand-finished, meaning each one is unique. Subtle variations in texture and color are intentional and enhance the character and charm of the product, reflecting its artisanal quality.

This switch is compatible with most types of light bulbs (LED, Halogen, Incandescent) as long as the total wattage does not exceed the switch's 20A rating and the circuit's overall load capacity.

To maintain the finish, use a soft, dry cloth. Avoid using any abrasive cleaning agents or solvents, as these can damage the hand-finished surface.

You can, but it requires re-wiring to incorporate the second switch location. This must be done by a qualified electrician to ensure correct and safe installation.

The standard dimensions for this type of plate are typically 86mm x 86mm, designed to fit standard UK backboxes.

Verify that the power is on at the mains. Check that the wiring is correctly connected for a 2-way circuit. If unsure, consult a qualified electrician.

Ensure the bulb is correctly seated and of the appropriate wattage. Check that the switch rating (20A) is suitable for the connected load. If the issue persists, there may be a wiring fault; seek professional assistance.

Ensure the faceplate is correctly attached to the mechanism. If the toggle action feels incorrect, there might be an internal issue requiring professional inspection or replacement.