LAPP Strand Multi-Standard SC Cable - Black

Halogen-free means the wire's insulation and jacket do not contain halogens (like chlorine or bromine). In the event of a fire, this significantly reduces the emission of toxic and corrosive gases, improving safety for people and equipment.

This wire is primarily intended for dry room applications. For outdoor use or in wet environments, it must be adequately protected, for example, by running it within conduit or using a suitable, environmentally rated cable gland.

The LAPP 4160401 has a voltage rating of 600V. Ensure your application's voltage does not exceed this limit.

It is recommended to use a compatible cable gland system, such as the LAPP SKINTOP series, to create a sealed entry point for the cable into enclosures and equipment.

For fixed installations, the minimum bend radius is 6.8mm. Care should be taken to avoid exceeding this radius during installation to prevent damage to the conductor.

This wire is ideal for control systems, industrial automation, internal wiring of switchboards and distribution panels, and in transportation systems where fire safety is a concern.

The conductor is made of tinned copper, which provides excellent conductivity and resistance to corrosion.

Check all connections for proper seating and continuity. Ensure the conductor is fully stripped and making good contact with the terminal. Verify the voltage rating of the wire is not exceeded and that the power source is active.

Confirm the ambient temperature is within the specified operating range of -40°C to +105°C. If operating outside this range, consider a wire with a wider temperature tolerance.

Inspect the cable for cuts or abrasions. If damage is significant or compromises insulation, the affected section should be replaced. Ensure proper handling during installation to prevent future damage.

While the wire is flexible, it has a minimum bend radius of 6.8mm for fixed installations. Avoid sharp bends or kinking the wire, which can damage the internal conductor. Gently work the wire into the desired shape.