PVC Architrave - 45mm - Brown

This PVC architrave features a bullnosed front edge and a slightly rounded back edge, providing a ...

Best current price£14.16from Professional Building Supplies

All Offers

2 offers from £14.16

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam Light Pvc Architrave - 45Mm X 5Mtr Oak Woodgrain
Free delivery in 1–3 days
£14.16
Visit shop
PVC Cladding UKFreefoam Light Pvc Architrave - 45Mm X 5Mtr Oak Woodgrain
Free delivery in 1–3 days
£14.16
Visit shop

Product Information

Full details

The Freefoam 45mm Brown PVC Architrave is designed for professional builders, DIY enthusiasts, and homeowners seeking a low-maintenance, aesthetically pleasing finish for door and window frames. The primary benefit of this product is its durability and resistance to moisture, which eliminates the need for painting or regular sanding compared to traditional timber architraves. However, users should note that as a rigid PVC product, it requires precise cutting tools and careful handling to ensure clean edges and proper alignment during installation.

All features

ColourBrown
Model Part NumberFA45WGO
BrandFreefoam

Extended Product Information

FAQs

Can this architrave be painted?

It is designed to be maintenance-free and is not intended to be painted. The brown finish is meant to be the final look.

What tools are needed for installation?

You will need a fine-toothed saw, a tape measure, a pencil for marking, and a suitable grab adhesive or silicone.

Can I use this outdoors?

This product is primarily designed for internal interior spaces. For external applications, consult manufacturer documentation regarding specific outdoor UV resistance.

How do I cut 45-degree miters?

Use a miter box and a fine-toothed saw to ensure an accurate 45-degree angle for clean corner joints.

Is the material flexible?

It has some slight flexibility, but it is a rigid PVC profile. Do not attempt to force it around tight curves as it may crack.

How do I remove adhesive spills?

Wipe away excess adhesive immediately with a clean, damp cloth before it sets. Once cured, it is very difficult to remove without damaging the PVC.

Troubleshooting

Adhesive failing to bond

Ensure the wall surface is free of grease, dust, and loose paint. Use a high-tack grab adhesive specifically rated for PVC.

Rough or jagged edges after cutting

Use a fine-toothed blade or a dedicated PVC cutting blade. Sanding lightly with a very fine-grit paper can smooth out minor imperfections.

Trim bowing away from the wall

Hold the trim in place with painter's tape or temporary supports while the adhesive cures to ensure it maintains consistent pressure against the wall.

Pros and Cons

Pros

  • Resistant to rot, decay, and moisture damage
  • Requires zero painting or ongoing maintenance
  • Easy to install with common construction adhesives
  • Smooth, uniform brown finish
  • Lightweight and easy to handle during installation

Cons

  • Not suitable for heavy-duty structural support
  • PVC can be brittle if cut with incorrect blade types
  • Visible join lines if not installed with precision
  • Limited color range compared to natural timber

Setup, Compatibility & Care

Installation is straightforward due to the lightweight nature of the PVC. Ensure your walls are dry and stable before applying adhesives. If using grab adhesive, apply a continuous bead along the rear of the architrave, press firmly into position, and hold until the initial tack sets. Because it is pre-finished, you do not need to apply protective coatings. To clean, simply wipe with a soft, damp cloth and mild household detergent. Avoid using abrasive sponges or harsh solvent-based cleaners that could dull the smooth surface of the PVC.

Similar items

Price History

DatePrice
Visit shop