JG Speedfit MDPE Pipe Insert - 20mm - Blue

The insert provides a secure seal and prevents leaks when connecting 20mm MDPE pipe to JG Speedfit or compression fittings.

Yes, inserts must be used with all Speedfit connections to ensure a watertight seal.

You need a 20mm insert, specifically designed for this pipe size.

Push the insert firmly into the end of the MDPE pipe, then insert the pipe with the insert into the fitting.

Check if the pipe is fully inserted, then inspect the insert. If the leak continues, replace the insert and/or fitting.

It's best to replace inserts each time you disassemble and reassemble a connection to ensure a good seal.

The inserts are made of high-quality, durable materials designed for plumbing applications.

They are compatible with JG Speedfit fittings and also suitable for use with compression fittings.

Ensure the insert is fully seated in the pipe and that the pipe is fully inserted into the fitting. If the leak persists, replace the insert and/or fitting.

Ensure the pipe end is clean and the insert is properly installed. Apply a small amount of lubricant to the pipe end, if necessary.

Replace the damaged insert with a new one.