Shopping.co.uk

FloPlast Solvent Weld Waste Pipe Coupler - 40mm

FloPlast Solvent Weld Waste Pipe Coupler - 40mm

This white ABS waste coupler from FloPlast is ideal for carrying waste safely and cleanly away fro...

Best current price£1.10from Professional Building Supplies

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceTrending
Professional Building Supplies£1.10Visit shop

Floplast White Solvent Weld Waste Bend Knuckle - 90 Degree X 32Mm

Visit shop

All Offers

93 offers from £1.10 - £28.30

View price history by clicking the chart icon.

Professional Building SuppliesFloplast White Solvent Weld Waste Bend Knuckle - 90 Degree X 32Mm
Free delivery in 1–3 days
£1.10
Visit shop
hartlepoolplumbing.suppliesFloplast White 32Mm Abs Solvent Weld 90° Bend/Elbow
Free delivery in 1–3 days
£1.22
Visit shop
B&QB&Q - 229414 White Solvent Weld 90° Non-Adjustable Waste Pipe Bend (Dia)40mm
Free delivery in 1–3 days
£1.58
Visit shop
eBayWP08W FloPlast 40mm Straight Coupling Push Fit Waste Pipe White
Free delivery in 1–3 days
£1.99
Visit shop
BradfordsMcalpine Waste Straight Connector Solvent Weld X Chrome Compression 32X32/35Mm Abs32/35G-Cb
£25.00 delivery
£3.60
Visit shop

Used Offers

5 offers from £6.99 - £43.19

View price history by clicking the chart icon.

eBay1.25"" MULTIFIT Straight TANK CONNECTOR Cistern McALPINE S11M
Free delivery in 1–3 days
£6.99
Visit shop

Product Information

Full details

This guide is for homeowners and plumbers using the FloPlast Solvent Weld Waste Pipe Coupler (40mm). It helps you understand the product's features, how to install it, and troubleshoot common issues. A key benefit is its reliable waste removal, but it's important to ensure proper solvent welding for a leak-proof connection.

All features

Model Part Number229412
BrandFloPlast

Extended Product Information

FAQs

What type of solvent cement should I use?

Use a solvent cement specifically designed for ABS plastic pipes. Always follow the manufacturer's instructions on the solvent cement.

Can I use this coupler with other pipe materials?

No, this coupler is designed for use with 40mm ABS waste pipes only.

How long should I wait before testing the connection?

Allow the solvent weld to cure completely. Refer to the solvent cement's instructions for the recommended curing time, typically a few hours.

What should I do if the connection leaks after curing?

If the connection leaks, it may be necessary to cut out the coupler, clean the pipe ends, and reapply with fresh solvent cement. Ensure a snug fit and sufficient solvent.

How do I ensure a good solvent weld?

Clean the pipe and coupler, apply solvent cement evenly, insert the pipe fully, and hold it firmly for a few seconds. Allow it to cure completely before use.

Is this coupler suitable for high-temperature waste?

No, the coupler is suitable for domestic waste water and is not designed for extremely high temperatures.

Troubleshooting

Leakage at the joint after installation.

Ensure sufficient solvent cement was applied. If the leak persists, cut the coupler out, clean the pipes, and reapply the coupler with fresh solvent cement.

Difficulty inserting the pipe into the coupler.

Ensure the pipe and coupler are the correct size and free of obstructions. Use a pipe cutter to ensure a clean, even cut on the pipe. If the pipes are still difficult to connect consider using a pipe lubricant.

Pros and Cons

Pros

  • Durable ABS construction ensures longevity.
  • Solvent weld provides a reliable, watertight seal.
  • Lightweight design simplifies installation.
  • Standard 40mm size fits common waste pipes.
  • Cost-effective solution for plumbing needs.

Cons

  • Requires solvent cement for installation (sold separately).
  • Permanent connection; cannot be easily disassembled.
  • Requires proper surface preparation for optimal sealing.
  • Compatibility limited to 40mm pipes.

Setup, Compatibility & Care

  1. Preparation: Ensure the 40mm waste pipes are clean, dry, and free of debris.
  2. Compatibility: This coupler is specifically designed for use with 40mm ABS waste pipes.
  3. Solvent Cement: Apply solvent cement evenly to both the inside of the coupler and the outside of the pipe.
  4. Assembly: Immediately insert the pipe into the coupler, ensuring a snug fit. Hold for a few seconds to allow the solvent weld to set.
  5. Curing: Allow the joint to fully cure according to the solvent cement manufacturer's instructions before testing.
  6. Care: Avoid harsh chemicals or excessive heat near the joint. Regularly check for leaks.

Similar items

FloPlast Miniflo Round Downpipe - 50mm Dia - 2m L - GreyFrom £11Hamilton Prestige Roller Sleeve - Short Pile - 9"From £4Pipe Liner - 25mm - Plasson - PL079500025From £1FloPlast Deepflow/ Hi-Cap Downpipe - 80mm x 4mtr Black - RPH4BFrom £28FloPlast Straight Waste Pipe Coupler - 21.5mm DiaFrom £4Kair Plastic Ducting Pipe - 150mm 6 Inch 350mm Short Length - Rigid Straight Duct Channel - WhiteFrom £12FloPlast Miniflo Black Round Gutter Socket - 50mm DiaFrom £11Ascoli Recessed Spotlight - White - AstroFrom £49FloPlast White Overflow Pipe Bend - 135 Degree - 21.5mmFrom £2GoodHome Foam Roller Sleeve - Pack Of 2From £5JG Speedfit MDPE Pipe Insert - 25mm - BlueFrom £10Hamilton Perfection Roller Sleeve - 9" short pileFrom £5

Price History

DatePrice
Visit shop