JG Speedfit MDPE Equal Straight Connector - 25mm - Blue

Yes, the fitting is demountable and can be reused. However, inspect the internal teeth and the pipe for damage before re-use.

No special tools are required for installation. A pipe cutter is recommended for a clean cut.

The fitting is designed to withstand typical domestic water pressures. Refer to the manufacturer's specifications for exact pressure ratings.

The fitting is suitable for use with both hot and cold water. Check the manufacturer's specifications for temperature limits.

Use a Speedfit demounting tool or a similar tool to release the pipe from the fitting. Insert the tool into the fitting and push against the internal collet while pulling the pipe.

Yes, the fitting is suitable for underground use, provided it is installed correctly and protected from physical damage.

Please refer to the manufacturer's warranty information for details.

Ensure the pipe is fully inserted into the fitting. If the leak persists, disconnect the fitting and inspect the pipe end for damage. Re-cut the pipe if necessary and re-insert into the fitting.

Ensure the pipe end is clean and free of debris. Use a pipe cutter to ensure a clean cut. Apply a small amount of lubricant (such as silicone grease) to the pipe end if necessary.