Ideal for filling holes up to 2cm in one go, this filler sands to a smooth finish, and is ready fo...Ideal for filling holes up to 2cm in one go, this filler sands to a smooth finish, and is ready for paint, nails, and screws once dry. Drying takes roughly 1-2 hours (depending on conditions). It's water-based. Keep out of reach of children. Always read the label. The easy way to fill holes of up to 2cm in one application. Sands easily to a smooth finish, is paintable and will accept nails and screws once dry. Drying time 1-2 hours (dependent on conditions). Water-based product. Keep out of reach of children. Always read label. Polycell Exterior Polyfilla is a tough multi-purpose filler suitable for all exterior masonry repairs. Ready mixed for instant use, it dries to a grey weatherproof finish that will accept bolts and screws and will not shrink or crack.
2x Polycell Multi Purpose Filler Interior Walls Ceilings Tube 330g WhiteFree delivery in 1–3 days£12.59Visit shop →
Product Information
Full details
This guide is for anyone using Polycell Deep Gap Polyfilla to repair holes and imperfections in interior surfaces. The product is ideal for filling holes up to 20mm deep in a single application, providing a smooth, paintable finish. A key benefit is the quick drying time, but be aware that drying times vary based on environmental conditions.
All features
Colour
White
Model Part Number
5084945
Brand
Polycell
Extended Product Information
FAQs
How long does it take for Polycell Deep Gap Polyfilla to dry?
Surface dry in 1-2 hours, depending on conditions.
Can I use this filler outdoors?
No, this product is designed for interior use only.
What surfaces can I use Polycell Deep Gap Polyfilla on?
It can be used on plaster, masonry, cement, stone, and wood.
Is Polycell Deep Gap Polyfilla paintable?
Yes, once dry, it is ready for paint.
Will it shrink or crack?
No, it is designed not to shrink or crack.
Can I put nails or screws into it?
Yes, once dry, it will accept nails and screws.
How should I store the product?
Do not store in extremes of temperature and protect from frost. Replace the membrane and lid to prevent it from drying out.
Troubleshooting
Filler is not drying properly.
Ensure the application area has adequate ventilation and the temperature is within the recommended range. Allow for longer drying times in humid conditions.
Filler cracks after drying.
Ensure that the filler is not applied in a layer deeper than 20mm in one application. For deeper repairs, apply in layers, allowing each layer to dry completely before applying the next.
Difficulty sanding the filler.
Ensure the filler is completely dry before sanding. Use appropriate sandpaper grit for a smooth finish.
Pros and Cons
Pros
Quick drying time allows for faster project completion.
Easy to sand, ensuring a smooth surface.
Suitable for a variety of interior surfaces.
Fills deep holes effectively, reducing the need for multiple applications.
Accepts nails and screws, expanding its application possibilities.
Cons
Drying time is dependent on environmental conditions.
Suitable for indoor use only.
Requires proper surface preparation for optimal results.
Setup, Compatibility & Care
Setup:
Ensure the surface and holes are dry and free of loose material.
Touch in nails and screw heads with a suitable metal primer.
When working close to electrics ensure supply is isolated.
Compatibility:
Compatible with plaster, masonry, cement, stone, and wood.
Suitable for use on interior surfaces only.
Care:
Do not store in extremes of temperature and protect from frost.
To prevent the product from drying out when storing, replace the membrane and lid.