Forgefix Through Bolt - Yellow - M8 x 75mm

These bolts are suitable for use with concrete, brick, and other masonry materials, as well as some timber applications.

Check the product packaging for the specific drill bit size required for M8 bolts. It is typically around 8mm.

Loosen the bolt and remove the item. You may need to cut the bolt off if it is severely corroded or cannot be removed by loosening.

Yes, the yellow finish provides some corrosion resistance, making them suitable for outdoor use. However, consider the environmental conditions and replace them as needed.

Load capacity depends on the material, the bolt size, and the installation. Consult the product specifications or a structural engineer for load calculations.

Zinc yellow passivation is a coating applied to the bolt for corrosion resistance, which is indicated by the yellow color.

Check if the hole is the correct size and depth. Ensure the threads are not damaged. Try a new bolt.

The hole may be too large. Try using a larger bolt or filling the hole with an appropriate filler.

Tighten the bolt further, but do not overtighten. Ensure the bolt is the correct length for the material thickness.