Arthouse Liquid Marbled Wallpaper - Grey

The pattern repeat for the Arthouse Liquid Marbled Wallpaper is 53cm.

The wallpaper is spongeable, meaning you can gently wipe it with a damp cloth or sponge to remove minor marks. Avoid harsh scrubbing.

This wallpaper uses the 'Paste the Paper' method, where you apply adhesive directly to the back of the wallpaper strip.

Each roll measures 10.05 meters in length and 53 centimeters in width.

It is not explicitly stated as moisture-resistant. It's generally best suited for dry interior areas like living rooms and bedrooms. Avoid high-moisture environments unless specifically confirmed by the manufacturer.

An offset (or drop) match means that each subsequent strip is offset from the previous one, typically by half the pattern repeat. For this wallpaper, the offset is 26.5cm, meaning you'll need to shift the pattern on the next strip accordingly to ensure continuous flow.

This refers to fine glitter particles that are embedded within the wallpaper's design layer, providing a subtle shimmer that is protected and durable.

Gently lift the affected area and re-smooth with a wallpaper brush, working from the center outwards. Ensure the paste is applied evenly and the wall surface is smooth.

Double-check the Offset 26.5cm pattern match instructions. Ensure strips are hung straight and not stretched. Make minor adjustments before the paste sets.

Verify that the correct type and amount of wallpaper adhesive have been used for the specific wallpaper type. Ensure the wall surface is properly prepared and not too porous.

Confirm that all rolls used have the same batch number. If differences persist, contact the retailer immediately, as this indicates a manufacturing issue.