Johnstone's Wall & Ceiling Paint - Maple Haze - Matt

It provides a smooth, non-reflective matte finish, offering a modern and sophisticated look.

The paint dries in approximately 1-2 hours.

It offers approximately 12m² coverage per litre.

Yes, this emulsion is designed for use on both interior walls and ceilings.

While durable, for high-moisture areas like kitchens and bathrooms, a paint specifically designed for these conditions might be more suitable. This Matt Emulsion is ideal for living areas, bedrooms, and hallways.

Surfaces should be clean, dry, and free from dust, grease, and flaking paint. Fill any imperfections and lightly sand glossy surfaces. A primer may be needed on new or uneven surfaces.

Clean brushes and rollers immediately after use with water.

Ensure the surface was properly prepared (clean, dry, primed if necessary) and that paint is applied evenly. Stir paint thoroughly before and during use.

Apply paint with lighter, even strokes. Consider using a higher quality brush or roller. Ensure paint is not applied too thickly.

Stir the paint well. If still too thick, a very small amount of clean water can be added sparingly (check manufacturer recommendations if available), but avoid over-thinning as it can affect coverage and finish.

Colours can sometimes look different on the wall compared to the swatch. This is normal. Ensure the surface is dry and a primer was used if necessary. Test a small area first.