Johnstone's One Coat Matt Paint - Manhattan Grey

Johnstone's One Coat Matt Paint is designed to provide excellent coverage with a single coat. However, on some surfaces or when changing colors significantly, a second coat may be required.

This paint is designed for interior walls and ceilings. It is not recommended for use on wood surfaces.

The paint typically dries to touch within 2-4 hours. Allow at least 4 hours between coats if a second coat is needed.

The paint has a wipeable finish. Clean the surface with a damp cloth and mild soap.

The coverage rate is typically around 12-14 square meters per liter, but this can vary depending on the surface.

While the wipeable finish is suitable for these areas, consider the level of humidity and ventilation. For high-moisture areas, a specific bathroom or kitchen paint might be a better choice.

Ensure paint is stirred well before use. Apply an even coat, avoiding overspreading. Use a good quality brush or roller.

Ensure the surface is properly prepared. Apply a second coat if necessary, especially over dark colors or on porous surfaces.

Ensure adequate ventilation. Check the room temperature and humidity levels. Allow sufficient drying time between coats.