HydroSure Essential In-Line Filter - 14mm Barbed

The 80 mesh screen traps sediment yet still allows for maximum water flow. Use to prolong the life...

Best current price£2.64from Water Irrigation

All Offers

2 offers from £2.64 - £2.94

View price history by clicking the chart icon.

Water IrrigationHydroSure Essential In-Line Filter -13mm Barbed
£3.99 delivery
£2.64
Visit shop

Product Information

Full details

This HydroSure Essential In-Line Filter is designed for gardeners and landscapers looking to protect their irrigation system components from sediment damage. Its primary benefit is prolonging the life of emitters and valves by trapping particulate matter, though users should be aware that the 80-mesh screen requires periodic cleaning to maintain optimal water flow. The filter features an 80-mesh screen for effective sediment capture and a 14mm barbed connection for easy integration into standard irrigation lines.

All features

Model Part Number44395
BrandHydroSure

Extended Product Information

FAQs

What does '80 mesh' mean?

An 80-mesh screen has 80 holes per linear inch, indicating a fine level of filtration suitable for most drip irrigation needs.

How often should I clean the filter?

Cleaning frequency depends on your water quality. For clear water, check monthly. For water with more sediment, check more often, perhaps weekly, until you establish a regular cleaning schedule.

Can this filter be used with larger diameter tubing?

This specific model is designed for 14mm barbed connections. You may need a different filter model or adapter for other tubing sizes.

Will this filter remove dissolved minerals or chemicals?

No, this filter is designed to remove particulate matter (sediment, grit, rust). It will not remove dissolved solids, salts, or chemicals.

What is the lifespan of this filter?

With regular cleaning and proper use, the filter housing can last for many years. The screen's lifespan depends on the level of sediment it captures.

Is this filter suitable for pressure washers?

This filter is designed for low-pressure irrigation systems and is not intended for use with high-pressure equipment like pressure washers.

Troubleshooting

Reduced water flow from emitters

Disconnect and clean the filter screen. Check for any kinks or blockages in the connected tubing.

Filter leaks at connection points

Ensure the barbed ends are fully inserted into the 14mm tubing. For a more secure fit, consider using hose clamps if the tubing allows.

Filter screen is damaged

Replace the filter unit. Contact the manufacturer or retailer for a replacement part.

Pros and Cons

Pros

  • Significantly extends the life of irrigation emitters and valves.
  • Maintains good water flow rates despite its filtering capabilities.
  • Easy to install without specialized tools.
  • Provides protection against common irrigation system clogging agents.
  • Cost-effective solution for maintaining system integrity.

Cons

  • Requires regular cleaning to prevent flow reduction.
  • 80-mesh may not be fine enough for extremely silt-laden water.
  • Additional adapters might be needed for non-standard tubing sizes.

Setup, Compatibility & Care

Setup:

  1. Ensure the main water supply is turned off.
  2. Identify the section of 14mm tubing where the filter will be installed.
  3. Push the barbed ends of the filter firmly into the ends of the 14mm tubing, ensuring a secure fit.
  4. Turn the water supply back on and check for leaks.

Compatibility:

  • Primarily designed for 14mm irrigation tubing.
  • Compatible with low-pressure irrigation systems, drip lines, and micro-sprinklers.
  • Ensure water source pressure does not exceed the filter's rating (if specified by manufacturer).

Care:

  1. Periodically disconnect the filter from the tubing.
  2. Carefully remove the screen.
  3. Rinse the screen thoroughly under running water to remove accumulated sediment.
  4. Reassemble and reconnect the filter. Frequency depends on water quality; check monthly or as needed.

Similar items

Price History

DatePrice
Visit shop