Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Fill any cracks or holes and sand smooth. Prime bare or porous surfaces with a suitable Vintro primer.
Application: Stir the paint thoroughly before use. Apply using a brush, roller, or spray. For best results, apply two coats, allowing the first coat to dry completely as per the drying time instructions. Avoid painting in very humid conditions or at temperatures below 10°C.
Compatibility: Vintro Matt Emulsion is suitable for interior walls, ceilings, woodwork, and metalwork. It can be applied over previously painted surfaces if they are in good condition and properly prepared. Ensure compatibility if painting over old oil-based paints by using an appropriate primer.
Care: Clean application tools immediately after use with water. To maintain the finish, wipe surfaces gently with a damp cloth. Avoid abrasive cleaners or excessive scrubbing, as this can cause burnishing on the matt surface. For stubborn marks, a mild detergent can be used sparingly, followed by a clean damp cloth.