* Water based and quick drying * Interior and exterior * No primer or undercoat needed * Low VOC's...* Water based and quick drying * Interior and exterior * No primer or undercoat needed * Low VOC's * Use on a variety of surfaces including wood, MDF, metal, plastic, tile, masonry, plaster and UPVC. This Bedec Multi-Surface Paint is suitable for indoor or outdoor use on a wide variety of surfaces. Apply this satin black paint directly to wood, plastic, metal, plastic-coated steel, galvanised steel, aluminium, copper, cladding, brick, masonry, fibreglass, terracotta, stone, plaster, MDF, tiles, melamine, UPVC and much more! With its outstanding flexibility, MSP resists flaking, peeling or cracking. It goes over most other paints and varnishes including weathered tar varnish, bitumen and creosote. This water-based paint is non-yellowing, and cleans up with water. Coverage of up to 12-14m² per litre. Usually dries in 2-4 hours - recoatable after 4 hours. Easy to apply by brush, roller or spray. Suitable for interior and exterior use. No primer or undercoat needed. Use on wood, MDF, metals, plastics, tiles, radiators and more. Resistant to flaking, peeling and cracking. Quick-drying, water-based formula - low VOC. Supplied in a 2.5L tin - total coverage of up to 35m².
Bedec Interior & Exterior Multi Surface Paint 750Ml Soft Matt Black£25.00 delivery£26.64Visit shop →
Bedec Multi Surface Paint 750ml Soft Satin Black for Interior and Exterior Use£25.00 delivery£26.64Visit shop →
Product Information
Full details
Bedec Multi-Surface Paint is designed for DIY enthusiasts and professionals seeking a versatile, high-performance coating for a wide range of interior and exterior projects. Its primary benefit is the ability to adhere to difficult surfaces like UPVC, metal, and tiles without the need for a separate primer or undercoat, saving significant project time. However, users should note that while it is highly durable, achieving a professional finish on very glossy surfaces may still require light surface preparation for maximum adhesion.
All features
Colour
Black
Model Part Number
BEDE2KB0003/70
Brand
Bedec
Extended Product Information
FAQs
Can this paint be used on radiators?
Yes, it is suitable for radiators and is designed to resist the heat-induced yellowing that affects many standard paints.
Do I need a primer for plastic surfaces?
No, Bedec Multi-Surface Paint is specially formulated to adhere to plastics and UPVC without a primer.
How many coats are recommended?
For best results, we recommend two full coats, allowing four hours of drying time between each.
Can it be used over bitumen or tar?
Yes, this paint is specifically noted for its ability to cover and adhere to weathered tar varnish, bitumen, and creosote.
Is this paint waterproof?
While it is suitable for exterior use and resistant to weathering, it is not intended for constant submersion in water (like inside a swimming pool).
What is the finish sheen level?
This specific variant provides a satin finish, which offers a soft, mid-sheen luster that is easy to clean.
Troubleshooting
Paint is not adhering well to the surface
Ensure the surface was cleaned of all grease and contaminants; if the surface is extremely glossy, a light sanding will improve mechanical adhesion.
Brush marks visible after drying
Ensure you are using a high-quality synthetic brush and do not overwork the paint; applying in thin, even layers helps the paint level out.
Paint is too thick for spray application
Thin the paint slightly with a small amount of clean water, testing in small increments until the desired consistency for your sprayer is achieved.
Pros and Cons
Pros
No primer or undercoat required
Highly versatile across multiple material types
Water-based for easy cleanup and low odor
Resists flaking and cracking
Excellent for both interior and exterior use
Cons
May require extra coats on high-contrast surfaces
Surface preparation still recommended for best long-term results
Satin finish may show surface imperfections more than flat matte
Setup, Compatibility & Care
Before application, ensure the surface is clean, dry, and free from loose debris or heavy grease. While the paint is designed for direct application, wiping down surfaces with a degreaser is best practice for heavy-duty exterior jobs.
Stir thoroughly before use to ensure an even pigment distribution.
Application: Apply using a brush, roller, or sprayer.
Drying time: The paint is touch-dry in 2-4 hours, with a recoat time of at least 4 hours.
Cleanup: Wash all tools immediately in warm soapy water.
Storage: Keep the tin tightly sealed in a cool, dry place away from frost to preserve the integrity of the water-based formula.