* For sealing holes drilled in bricks * Easily fill DPC injection holes * Dryzone system * 30mm x ...* For sealing holes drilled in bricks * Easily fill DPC injection holes * Dryzone system * 30mm x 14mm (at widest point) Dryzone System Fixing Plugs are used to hold the plasterboard in position. They are not used to hold the weight of the board - just to allow a smooth join between boards. Use a 5.5mm drill bit to drill 4 - 6 holes at board corners and middle no closer than 25mm to edges. Tap in Positioning Plugs with a hammer, ensuring the ¬final surface is even. A quick and easy way to seal holes in bricks or mortar after using Dryzone® DPC cream or Dryrod® damp proofing rod installation. Designed with fins to fill injection holes of 10-12mm, these damp proof plugs offer essential protection against the elements. * Easily fills DPC injection holes of 10-12mm diameter * 25mm plug length with fins for a firm and secure fit * Suitable for sealing holes drilled in bricks or mortar * Light grey finish to match similar mortar or brickwork * Quick and easy alternative to using sand or cement Dryzone DPC Plugs (100 Pack) in Light Grey
Dryzone Stone System Dpc Plugs X100 (Stone) – Damp Proof Course Hole Plugs For Sealing 10–12Mm Injection Holes In Brick & Mortar, Clean Alternative To Sand & CementFree delivery in 1–3 days£13.99Visit shop →
* For sealing holes drilled in bricks * Easily fill DPC injection holes * Dryzone system * 30mm x 14mm (at widest point) Dryzone System Fixing Plugs are used to hold the plasterboard in position. They are not used to hold the weight of the board - just to allow a smooth join between boards. Use a 5.5mm drill bit to drill 4 - 6 holes at board corners and middle no closer than 25mm to edges. Tap in Positioning Plugs with a hammer, ensuring the ¬final surface is even. A quick and easy way to seal holes in bricks or mortar after using Dryzone® DPC cream or Dryrod® damp proofing rod installation. Designed with fins to fill injection holes of 10-12mm, these damp proof plugs offer essential protection against the elements. * Easily fills DPC injection holes of 10-12mm diameter * 25mm plug length with fins for a firm and secure fit * Suitable for sealing holes drilled in bricks or mortar * Light grey finish to match similar mortar or brickwork * Quick and easy alternative to using sand or cement Dryzone DPC Plugs (100 Pack) in Light Grey