Setup, Compatibility & Care Instructions
Preparation: Ensure all surfaces are clean, dry, and free from grease, dust, and loose paint. For bare wood or metal, apply an appropriate exterior primer. For previously painted surfaces, lightly sand and clean. Ensure any existing treatments on wood are compatible.
Application: Stir the paint thoroughly before use. Apply two or more coats with a good quality brush or roller, allowing adequate drying time between coats. Avoid painting in direct strong sunlight, in very humid conditions, or when temperatures are below 10°C (50°F) or above 30°C (86°F).
Compatibility: This paint is designed for exterior wood and metal. It is not recommended for use on plastics or previously coated surfaces not specifically prepared.
Care: Clean any spills or marks immediately with a damp cloth. For routine cleaning of the painted surface, use a mild detergent and a soft brush or sponge. Avoid abrasive cleaners that could damage the finish.