Farrow & Ball Estate Eggshell Paint - Bone No. 15 - 2.5L
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and decorators seeking a sophisticated, washable satin finish for interior wood and metal. The Farrow & Ball Estate Eggshell Paint in Bone No. 15 offers an understated elegance and durability for high-traffic areas. A key benefit is its versatile neutral shade, Bone, which pairs harmoniously with various color palettes. However, as an Archive colour, it is made to order and non-returnable.
All features
| Colour | Beige |
|---|---|
| Brand | Farrow & Ball |
Extended Product Information
FAQs
Is Farrow & Ball Estate Eggshell suitable for bathrooms?
While Estate Eggshell is washable, it is not specifically formulated for high-moisture environments like bathrooms. For bathrooms, Farrow & Ball recommend using their Modern Emulsion or Exterior Eggshell.
How many coats of Estate Eggshell should I apply?
Generally, two coats are recommended for optimal coverage and colour depth. However, this can vary depending on the surface condition and the colour being overpainted. Always follow with a second coat if needed.
Can I use Farrow & Ball Estate Eggshell on walls?
No, Estate Eggshell is specifically designed for interior wood and metal surfaces. For walls, Farrow & Ball offer Estate Emulsion (matte finish) and Modern Emulsion (scuff-resistant finish).
What is the difference between Estate Eggshell and Modern Eggshell?
Estate Eggshell has a lower sheen (approx. 20%) and is traditionally used on woodwork. Modern Eggshell has a higher sheen (approx. 40%), is more durable, and is suitable for high-traffic areas like kitchens and hallways, including woodwork and walls.
How do I clean the Estate Eggshell finish?
The finish is washable. Use a soft cloth dampened with mild detergent and water. Wipe gently and avoid using abrasive cleaners.
Why is Bone No. 15 non-returnable?
Bone No. 15 is part of the Farrow & Ball Archive collection. Archive colours are mixed to order specifically for you and therefore cannot be returned unless faulty.
Troubleshooting
Paint not adhering well
Ensure the surface is properly prepared, clean, dry, and free from contaminants. If painting over a glossy surface, ensure it has been lightly sanded. Use the appropriate Farrow & Ball primer and undercoat.
Uneven finish or brush marks visible
Stir the paint thoroughly. Apply thin, even coats rather than one thick coat. Use a high-quality brush or roller and maintain a wet edge to avoid lap marks. Allow sufficient drying time between coats.
Colour appears different than expected
Lighting conditions significantly affect paint colour perception. Test a sample in the intended location. As Bone is an Archive colour made to order, ensure the correct shade was selected and the product received matches the label.
Pros and Cons
Pros
- Durable and washable finish ideal for active households.
- Versatile neutral 'Bone' shade complements many color schemes.
- Suitable for a wide range of interior wood and metal surfaces.
- Provides a sophisticated, low-shine aesthetic.
- Water-based formula for easier application and cleanup.
Cons
- As an Archive colour, it is made to order and non-returnable.
- Requires proper surface preparation for optimal results.
- May require multiple coats for full coverage, depending on the surface.
- Satin finish might not be suitable for all design preferences (e.g., matte purists).
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion. For previously painted surfaces, a coat of Farrow & Ball Primer & Undercoat is recommended, tinted to a colour close to Bone. Unrepaired plaster or new wood should be treated with a suitable Farrow & Ball plaster or wood primer.
Application: Stir the paint thoroughly before and during use. Apply using a good quality brush or roller. Typically, two coats are recommended for best results. Allow adequate drying time between coats (usually 2-4 hours).
Compatibility: Suitable for interior wood and metal surfaces. Not intended for walls or ceilings.
Care: This is a washable finish. To clean, use a soft cloth dampened with mild detergent and water. Avoid abrasive cleaners or excessive scrubbing, which can damage the finish.