Polycell Fine Surface Polyfilla - White

Surface dry in 30 - 60 minutes, depending on conditions and depth of fill.

No, Polycell Fine Surface Polyfilla is designed for indoor use only.

It is suitable for use on wood and plaster surfaces.

Replace the cap and remove excess filler from tools before cleaning in warm water.

It is designed for filling fine cracks up to 2mm wide. Avoid applying in thick layers.

Yes, sand down with fine sandpaper when fully dry to achieve a smooth surface.

The Volatile organic compounds (VOC) content is 1 g/l, which is considered minimal.

Yes, once it is fully dry and sanded, it is ready to be painted.

The filler may have been applied too thickly. Remove the cracked filler, clean the area, and apply in thinner layers. Allow each layer to dry before applying the next.

Ensure the surface is clean, dry, and free of loose material. Lightly sand glossy surfaces to improve adhesion. Use a suitable metal primer on any nail or screw heads before applying filler.

Use a sharp filling knife to apply the filler. Ensure the filler is level with the surface. Lightly sand the dried filler with fine sandpaper to smooth out any imperfections.