Farrow & Ball Modern Cromarty No.285 Eggshell Paint - Green

It is suitable for interior wood, metal, and concrete. This includes skirting boards, doors, kitchen cabinets, furniture, radiators, and floors.

Modern Eggshell is washable. You can clean it with a damp cloth or sponge. For tougher marks, use a mild detergent solution and rinse with clean water. Avoid abrasive cleaners.

Modern Eggshell has an eggshell finish, which is a subtle sheen that is less reflective than gloss but more durable and washable than a matt finish.

It is recommended to apply two coats of Modern Eggshell for best coverage and durability, ensuring adequate drying time between each coat.

Yes, Farrow & Ball Modern Eggshell is rated as floor grade, meaning it is tough enough for use on wooden and concrete floors.

Typically, it takes 2-4 hours for the paint to dry between coats, but this can vary depending on temperature and humidity. Full curing can take up to two weeks.

Cromarty is described as a neutral yet atmospheric muted green-grey. It is designed to be subtle and calming, sitting comfortably without leaning heavily towards warm or cool tones.

Ensure the surface was properly prepared, clean, and dry. Use the correct primer for the surface type (e.g., Wood & Metal Primer for bare wood/metal). Ensure no contaminants like oil or grease were present.

Stir the paint thoroughly before and during use. Apply thin, even coats rather than one thick coat. Use a high-quality brush or roller suitable for eggshell finishes. Allow adequate drying time between coats. Consider lightly sanding between coats if necessary.

Ensure the paint has been stirred thoroughly. If the environment is very cold, allow the paint to reach room temperature. Avoid adding water unless specifically instructed by Farrow & Ball for a particular application, as it can affect the finish.

This can sometimes happen in humid conditions or if the paint has not fully cured. Ensure adequate ventilation and allow more time for the paint to harden. Avoid heavy use of the painted surface until fully cured (which can take up to two weeks).