Godox X5 Wireless Flash Hotshoe and Trigger - Sony

The Godox X5-S is designed for Sony cameras that feature a standard hotshoe mount.

No, the X5-S is specifically designed to integrate with the Godox iT32 mini flash as part of its modular system. It functions as a hotshoe and wireless trigger for the iT32.

The X5-S automatically switches modes. When the iT32 flash is mounted directly onto the X5-S (which is on the camera's hotshoe), it operates in on-camera mode. When the iT32 is detached and used wirelessly, the X5-S acts as the transmitter, controlling the off-camera flash.

The Godox X5-S utilizes 2.4GHz wireless technology, providing reliable communication. While specific range can vary based on environmental factors, it is designed for typical studio and on-location use.

Yes, the X5-S supports High-Speed Sync when used with the compatible iT32 flash, allowing for flash synchronization at shutter speeds faster than your camera's native sync speed.

The X5-S draws power from the camera through the hotshoe connection when used in on-camera mode. When acting as a wireless transmitter, it also receives power through the hotshoe connection on the camera.

Ensure the X5-S is set as the transmitter and the iT32 is set as the receiver. Check that both units are powered on and within range. Verify that the correct wireless channel and group settings are selected on both devices.

Confirm the X5-S is securely mounted on the camera's hotshoe. Ensure the iT32 flash is properly attached to the X5-S. Check that the camera and flash are powered on, and that the flash is not in sleep mode.

Check for any obstructions between the camera and the flash. Ensure the camera's metering mode is appropriate for the scene. Reset both the X5-S and the iT32 to factory defaults if the issue persists.

Verify that HSS is enabled in the X5-S settings and that your camera's shutter speed is set above the camera's native sync speed. Note that HSS may have range limitations or reduced power output compared to normal sync.