Godox X2T-F Transmitter - Fujifilm

The X2T-F is compatible with most Fujifilm digital cameras featuring a standard ISO hot shoe. For full TTL and HSS functionality, specific camera compatibility lists should be consulted on the Godox website.

You can use the 3.5 mm sync socket to trigger non-Godox flashes or cameras remotely, but you will not have TTL, HSS, or group control over those flashes. For full control, compatible Godox flashes are required.

Connect the transmitter to a computer using a Type-C USB cable and download the firmware update tool from the Godox website. Follow the instructions provided with the firmware update tool.

The Godox X2T-F has a wireless range of up to 328 feet (100 meters) in open areas, subject to environmental conditions and obstructions.

Yes, the X2T-F features built-in Bluetooth, allowing you to control its settings remotely via the GodoxPhoto app, available for both Android and iOS smartphones.

The ID setting helps prevent interference by ensuring that the transmitter only communicates with flashes that are set to the same specific ID number, in addition to the channel.

Yes, the Godox X2T-F supports High-Speed Sync (up to 1/8000s) for compatible Fujifilm cameras and Godox flashes, allowing for faster shutter speeds than the camera's native sync speed.

Ensure the transmitter and flashes are set to the same channel and ID. Verify that flashes are powered on and in wireless receiver mode. Check battery levels in both the transmitter and flashes. Confirm that the camera is compatible and properly seated on the hot shoe.

Try changing to a different channel or ID on the transmitter to avoid interference. Ensure there are no physical obstructions between the transmitter and flashes. Reduce the distance between the transmitter and flashes if possible.

Check the brightness settings within the transmitter's menu. Ensure the protective film has been removed from the LCD screen.

Ensure Bluetooth is enabled on your smartphone. Restart both the transmitter and your smartphone. Try re-pairing the devices through the GodoxPhoto app.

Confirm that your camera's sync speed setting allows for HSS. Ensure the selected flash mode on the transmitter supports HSS (usually Manual or TTL) and that the flash unit itself is HSS capable.