Best current price£31.04from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£31.04Visit shop Storm White Polyx Aluminium F Section - 10Mm X 3Mtr
Visit shop2 offers from £31.04
View price history by clicking the chart icon.
The PolyX Aluminium F Section is an essential component for contractors and DIY enthusiasts installing 10mm polycarbonate roofing or walling panels. It serves as a structural edge trim that provides a clean, professional finish while protecting the exposed edges of your sheets. While this profile is exceptionally durable and weather-resistant, users should note that it is precision-engineered specifically for 10mm thickness and may not be compatible with thicker or thinner panel variants.
| Model Part Number | AF103-W |
|---|---|
| Brand | Storm |
No, this F Section is specifically designed for 10mm sheets and will not fit larger thicknesses.
Yes, the white powder coating is designed to be weather-resistant and withstand standard outdoor conditions.
You can easily cut the aluminium using a standard hacksaw with a fine-tooth blade.
The product is designed as a friction-fit trim; if additional mechanical fixing is needed, standard stainless steel screws should be used to prevent corrosion.
Being made of aluminium, the material is inherently corrosion-resistant, and the powder coating adds an extra layer of protection.
Check for burrs on the polycarbonate edge from cutting and ensure the sheet is exactly 10mm thick.
Ensure no debris is trapped in the channel and consider using a bead of neutral-cure silicone for a tighter, bonded fit.
Minor surface scratches can be touched up with exterior-grade white touch-up paint specifically designed for powder-coated aluminium.
To install the PolyX Aluminium F Section, ensure your 10mm polycarbonate sheet edge is clean and free of jagged plastic burs. Slide the F-profile firmly onto the panel edge, ensuring it is seated fully along the entire length. For increased security in high-wind areas, you may apply a small bead of neutral-cure silicone sealant inside the channel before insertion. Compatibility is strictly limited to 10mm polycarbonate sheets; do not force this trim onto thicker panels to avoid deformation. For care, simply wipe down with a mild soap solution and a soft cloth during routine maintenance to keep the white finish looking new.
PolyX Aluminium F Section - 25mm - WhiteFrom £33
PolyX Aluminium F Section - 16mm - WhiteFrom £32
Floplast Square Downpipe Offset Bend - 112.5 Degree - Anthracite GreyFrom £5
PolyX Aluminium F Section - 10mm - 3m - BrownFrom £32
Weatherboard Cladding Two Part External Corner - Misty GreyFrom £27
Gr8 Home Polyester Table Runner - CreamFrom £7
FloPlast Black Square Downpipe Bend - 112.5 Degree OffsetFrom £4
FloPlast Brown Square Downpipe Offset Bend - 65mmFrom £4
Weatherboard Cladding Two Part External Corner - Sage GreenFrom £41
Weatherboard Cladding Reveal Liner Trim - 3mtr - WhiteFrom £37
FloPlast Black Square Gutter Shoe - 65mmFrom £5
FloPlast White Square Downpipe Shoe - 65mmFrom £5