Best current price£16.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£16.90Visit shop VEVOR Pipe Tube Bender, 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm) OD, 3 in 1 Manual Lever Tube Bender, 180° Copper Aluminum Pipes Bending Tool for Automotive Repair, HVAC Air Conditioning
Visit shop1 offer from £16.90
View price history by clicking the chart icon.
The VEVOR 3-in-1-Rohrbiegegerät is an essential tool for HVAC technicians, automotive mechanics, and DIY enthusiasts who require precise bends in copper, aluminum, thin iron, or stainless steel tubing. It offers the key benefit of creating clean, deformation-free angles from 0° to 180° through a high-leverage design; however, users should note it is strictly limited to pipe wall thicknesses between 0.5 mm and 1.2 mm.
| Model Part Number | 010111839696 |
|---|---|
| Brand | VEVOR |
Yes, it is designed for copper, aluminum, thin iron, and stainless steel tubing within the specified wall thickness range.
The device is capable of creating precise bends ranging from 0° to 180°.
No, this specific model is designed for 6.35 mm, 9.5 mm, and 12.7 mm diameters only.
No, the 40 cm handle is fixed to provide optimal leverage for the supported tubing sizes.
When used correctly within the 0.5 mm to 1.2 mm thickness range, the tool is designed to prevent kinking and deformation.
Keep the channels free of dust, remove metal filings after use, and lubricate the pivot points occasionally with standard machine oil.
Verify that the pipe wall thickness is within the 0.5 mm to 1.2 mm range and that you are using the correctly sized groove.
Ensure the pivot hinge is lubricated and that you are bending the material slowly to allow the metal to form around the die.
Check that the pipe is fully seated in the groove before starting and align the edge of the pipe exactly with the zero-degree mark on the scale.
To begin using the tool, ensure your tubing matches one of the three supported diameters (1/4", 3/8", or 1/2"). Verify that the wall thickness is between 0.5 mm and 1.2 mm; attempting to bend pipes outside this range can damage the tool or result in poor bend quality. Regarding care, keep the bending channels clean of debris or metal shavings to prevent surface scratches on your pipes. Periodically apply a light machine oil to the pivot point to ensure smooth operation of the lever mechanism. When not in use, store the tool in a dry, temperate environment to prevent aluminum oxidation.
Kärcher K 3 eco!Booster Pressure Washer - YellowFrom £133
Fischer FXA Throughbolt - SilverFrom £26
Karcher K 5 Comfort Premium Pressure Washer - YellowFrom £329
Kärcher K2 Home Pressure Washer - KarcherFrom £99
Black & Decker Dustbuster Pivot AutoVac Handheld Vacuum Cleaner - GreyFrom £41
Kärcher K 6 Comfort Premium Pressure Washer - Corded - YellowFrom £389
MEXCO M14 to Hex Adaptor - TDXM14HEXSETFrom £8
Karcher K 5 Wcm Flex Eco!Booster Home Pressure WasherFrom £287
VEVOR Hydraulic Pipe Crimping Tool - GC-1632From £72
VEVOR Hydraulic Pipe Crimping Tool - V12, V15, V18, V22, V28 JawsFrom £65
Forgefix Carriage Bolt & Nut - M10 x 200mm - Bag 10 - WhiteFrom £5Forgefix Carriage Bolt & Nut - Silver - M12 x 200mm - Bag 5From £4