MEXCO M14 to Hex Adaptor - TDXM14HEXSET

You will need a power drill with a three-jaw chuck, the MEXCO M14 to Hex Adaptor, the provided Allen key, and an M14 bit.

You can use any M14 fit drill bit or router finger bit that is designed for use with a standard drill.

The adaptor is suitable for a wide range of applications, but the performance depends on the power of the drill. Consider the demands of your specific task.

Insert the M14 end of the adaptor into the M14 bit and tighten it with the included Allen key.

Clean the adaptor after each use. Store it in a dry location, and inspect it regularly for any signs of damage.

Replacement parts are typically not required, but you can contact MEXCO for information.

Ensure the drill chuck is fully open and the hex end of the adaptor is clean and free of debris.

Tighten the drill chuck securely. Check if the drill bit is compatible with the material you are working with.

Carefully remove the bit by hand or with pliers if necessary. Ensure there is no damage to the adaptor or the bit.