S-Fixx Blackout 3 In 1 Rust Converter Paint - Black

Blackout is touch dry in 30 minutes and fully cures in approximately 3 hours.

It is recommended to remove loose paint. Lightly sand the surface to ensure proper adhesion before applying Blackout.

Blackout can be applied to steel, wood, aluminium, plastics, copper, carbon fibre, ceramics, stone, brick, and glass.

Yes, Blackout acts as a primer. A topcoat is recommended for protection and aesthetics.

Coverage depends on the surface and application method. One liter will typically cover a specific area, depending on the number of coats and surface porosity. The product label should give you the exact coverage.

Clean brushes and rollers with appropriate solvents, as indicated on the product label.

Blackout can withstand temperatures from -40°C to +240°C.

While Blackout can withstand high temperatures, it's essential to check the exhaust system's specific heat resistance to ensure it falls within the product's limits.

Ensure the surface is properly prepared and free of contaminants. Check the ambient temperature and humidity levels. Ensure proper ventilation. Apply thinner coats.

Ensure all loose rust was removed before application. Apply a second coat of Blackout. Check for any areas not fully covered.

Verify compatibility with the topcoat manufacturer’s recommendations. Consider a different topcoat if necessary.